Project Deadalus and Imperator [CL-5}

```

// START LOG

--------------------------------------------------------------------------------

SUBJECT: "[Modifying Venator for a more Ship to Ship focus along with some technologies to be used on future designs]"

OPERATOR: "[Papa]"

ATTENDING: "[Cat, Iris, Vamp]"

DATE: "[13/10/25]"

--------------------------------------------------------------------------------

Project Deadalus is modifications for my own personal Venator for future use. The Ship has been christened Deadalus in honour of an old friend on mandalore. Back on track, it was captured recently over base anaxes and sent to RS HQ now it had minor damaged and repaired. Once this was done I went over the schematics and information on the ship. I decided to run several simulations seeing what modifications could be made. I first looked into adding cortosis armour along with programmable matter and reinforced Hull plating but the cortosis was an unrealistic idea. I moved on testing reactor strength deciding to replace the current one with a Kyber powered system to free up some of the tibbana usage. Once this was done I replaced the standard 8 dual turbos with sextuple turbos and replaced the turbos at the front sides with Missile bays capable of switching between ion, proton and concussion missiles. After this I added additional weapon mounts for SPHA-T Laser systems and Once the modifications where completed I ran some simulations. Ship showed it could easily defeat munificents and recusants while providence show more of a challenge meanwhile it would require 2 of these modified venators to engage successfully with a luckerhulk within acceptable loss parameters.

Costs are to be high so effectiveness of deadalus under Gideons command need to be sene then we can move into stage 2 whether that is imperator program or refits. Ship will act as tested for other systems.

--------------------------------------------------------------------------------

// END LOG

```